Why Your Rolls Royce Remote Key Isn't Working
If your Rolls Royce Phantom remote key isn't functioning, it could be due to one of the following issues. It could be due to a dead battery in the coin-cell, water damage, or a damaged microchip that requires reprogramming.
The keys should be stored in a dry place, away from wet or electrical areas. If rolls royce key TheKeyLab doesn't help, you can try these steps:
Troubleshooting
Rolls Royce has a reputation for being a well-groomed, sophisticated automotive brand that is dedicated to excellence. Regular maintenance is crucial to avoid costly and time-consuming issues in the future. One of the most important maintenance tasks is to read and clearing fault codes. Fault codes are essentially SOS messages sent by your vehicle's complex electronic system. It's like refusing to treat a persistent cold. they could be a sign of a bigger issue.
There are many possible reasons your key fob could stop working. This could be due to a dead coin-cell battery or water damage, interference in the signal, problems with the receiver module or a malfunctioning chip. If you have tried everything from replacing the battery, to reprogramming, and the problem is still there, it may be the right time to take your Rolls Royce to a professional for further troubleshooting.
The battery is the first thing you should be looking for when a keyfob isn't working. A depleted coin battery is the most common reason for a key fob to stop functioning. It is vital to replace the battery with the button-cell battery which has the same size, voltage, and specification as the original. It is recommended that the key fob be stored in a safe place and away from objects like coins or keys that could cause mechanical damage.
After you replace the battery, make sure that all metal retaining clips are in place and will not cause any contact issues. Make sure that the battery is free of corrosion-causing substances. If the battery isn't authentic Rolls-Royce Replacement, it could be damaged by unsuitable parts and cause the receiver module or doors to lock.
Faulty Receiver Module
If your key fob suddenly stopped working and you tried everything to fix it (replaced the coin battery or reprogrammed the key and even bought a spare) it could be a fault with the module that receives and decodes the remote control signals. This is particularly true when the key fob is used with a different vehicle.
The receiver modules in the key fobs are fitted with metal clips which hold the battery in place and complete the circuit on the activation of the buttons. If they're damaged or bent, it could prevent the key fob from receiving the proper signal to unlock/lock the car. In certain situations, the receiver module may also stop functioning due to malfunctioning electronic chips.
Key fob not working properly
Your key fob could malfunction due to a variety of reasons. The first issue that can occur is typically a dead battery in the coin-cell. It is easily replaced in a matter of minutes. Damage to the receiver module, water issues or signal interference could also cause the key fob to stop functioning. You can test for these issues by disassembling your key fob, and applying electronic cleaner or isopropylethanol to the chip.
Another reason could be worn buttons. Remote controls for car keys have rubberized buttons that can wear out or become loose over time. This causes the pressure being lost between the button and the pressure point, which causes it not to function properly. This is a simple fix for most key fobs and can be done at home by taking the key apart and removing the buttons, then cleaning them. Soldering them back in place can bring them back to working order.
Other reasons for the malfunctioning keyfob could be the battery's 12 volts being dead, keys that are not paired and need to be programmed again, or a malfunctioning chip. A chip that is defective will stop the key fob from sending an indication to the vehicle's receiver module. The key fob is able to start the engine of your Rolls Royce when it receives a signal from the chip.
Occasionally, a push-button start key can get hacked by tech-savvy thieves. They can employ artificial intelligence to pick up on the unique signal that comes from the key fob and unlock or activate the ignition of your car. Fortunately, this type of hack is becoming increasingly rare due to security measures that have been improved dramatically over the years.
You can always contact a locksmith company when you've lost your remote key to your Rolls Royce. They will create duplicates. An expert locksmith knows the details of every vehicle model, even ones with sophisticated central locking systems. This means they can create a duplicate of your key fob with no damage to the original. They will also offer an alternative to purchasing an exchange from the dealer. Autolocks LTD is a well-known company in the South East England that can provide excellent service for all Rolls Royce models.